上保护层开采底板破坏深度和应力分析研究

上保护层开采导致的底板变形、应力释放会使被保护层内高瓦斯沿着上覆岩层内形成的空隙裂隙结构向上运移，很容易造成所采工作面采空区内瓦斯增加，造成工作面瓦斯超限。以峰峰集团以黄沙矿为研究实例，针对其主采的2号煤层利用FLAC^3D模拟软件进行上保护层开采底板应力研究，揭示了上保护层开采底板应力的规律特性，对于保护层开采工作瓦斯治理具有一定的指导意义。     

浅谈煤与瓦斯突出矿井"U"型通风系统采煤工作面上隅角瓦斯管理

屯兰煤矿是煤与瓦斯突出矿井,瓦斯涌出量大,上隅角瓦斯治理困难。为解决这一通风难题,该矿采取沿空留巷抽采措施进行作业。实践证明,该技术解决了上隅角瓦斯积聚隐患,保障了矿井高产高效。     

高瓦斯矿井回采工作面瓦斯综合抽采技术实践

为了解决高瓦斯矿井工作面瓦斯涌出量大、瓦斯浓度高,制约工作面安全生产的问题,以亨元煤业为背景,结合矿井开采及瓦斯地质条件,确定了本煤层顺层钻孔抽采、穿层钻孔抽采邻近层和覆岩裂隙带瓦斯、以及对上隅角布置抽采管路进行抽采的综合治理方法。试验表明,工作面开采期间瓦斯涌出正常,上隅角瓦斯浓度保持在0.56%以下,实现了工作面安全高效开采。     

特厚煤层综放工作面瓦斯抽采技术研究

为解决蒋家河煤矿采空区瓦斯涌出量大、上隅角瓦斯超限和回风平巷风排瓦斯量大等问题,提出了本煤层预抽、专用瓦斯抽放巷抽采和上隅角埋管抽采瓦斯相结合的方法对该矿ZF202综放工作面进行瓦斯治理,进行了现场实测和瓦斯抽采效果分析。结果表明,本煤层预抽后,瓦斯含量由7.92 m^3/t下降为4.21 m^3/t,瓦斯压力由0.72 MPa下降为0.38 MPa;上隅角瓦斯浓度由0.78%下降至0.4%左右。通过对比,专用瓦斯抽放巷的抽采纯量是高位钻孔的2.5倍,抽采效果好于高位钻孔,使工作面和上隅角瓦斯浓度保持较低水平,有效地解决了特厚煤层综放工作面瓦斯超限问题,为安全生产提供了重要保障。     

基于滑模的运载器主动段俯仰通道姿控系统设计

与传统比例-积分-微分（PID）控制方法相比，滑模控制（SMC）方法可以比较容易地将不确定性纳入控制器设计中，从而增强系统的鲁棒性。探索了SMC技术在运载器主动段姿态控制中的工程应用，首先通过分析基于趋近律的SMC系统，提出了降低不连续切换项系数的需求，然后研究了基于干扰上界的SMC方法。三通道小偏差仿真结果验证了两种方法的控制效果，表明第2种控制器的鲁棒性更好，稳态误差小，同时发动机喷管摆角需求较小。     

一款紧凑增强型可变阻抗电磁带隙结构

基于传统AI-EBG结构,提出了一种小尺寸的增强型电磁带隙结构,实现了从0.5~9.4 GHz的宽频带-40 dB噪声抑制深度,且下截止频率减少到数百MHz,可有效抑制多层PCB板间地弹噪声。文中同时研究了EBG结构在高速电路应用时的信号完整性问题,使用差分信号方案可改善信号完整性。     

气管上段腺样囊性癌的临床病理

目的　探讨气管上段腺样囊性癌的临床病理特征及诊断和鉴别诊断要点。方法　收集2000年1月至2014年2月在北京协和医院确诊的4例气管上段腺样囊性癌病例，通过光镜、免疫组织化学及组织化学染色分析其临床病理特征、免疫组织化学特点、诊断及鉴别诊断要点。结果　4例气管上段腺样囊性癌患者中，男1例，女3例，平均年龄47岁(38~57岁）；既往均无腺样囊性癌病史，1例患者既往有结节性甲状腺肿手术史。镜下检查4例均为筛状/管状型腺样囊性癌，3例累及甲状腺组织，3例累及神经组织，未见淋巴结受累。免疫组织化学染色示4例P16、CD117、BCL2、P63、SMA均阳性，Ki67指数平均8%，TTF1和P53均阴性；4例中基底膜样物胶原Ⅳ阳性；组织化学染色示AB/PAS阳性。术后均接受总剂量为48~56 Gy的放疗，随访6~120个月，平均72.5个月，1例术后96个月复发，3例随访期间无复发及转移。结论　气管上段腺样囊性癌是罕见的原发于气管的低度恶性肿瘤，肿瘤生长缓慢，就诊时多数已侵及甲状腺组织，需要与原发于甲状腺的恶性肿瘤相鉴别，特别是在甲状腺穿刺及术中冰冻检查时。结合电子喉气管镜下表现、典型的形态学及免疫组织化学和组织化学染色有助于准确诊断。手术难以切除干净，术后放疗对延缓疾病复发有一定帮助。     

Adaptive robust boundary control of shaft vibrations under perturbations with unknown upper bounds

This paper presents robust and adaptive boundary control designs to stabilize the two‐dimensional vibration of hybrid shaft model. The hybrid shaft is mathematically represented by a set of partial differential equations, governing the shaft vibrations, coupled to ordinary differential equations, describing rigid body spinning and dynamic boundary conditions. The control objective is to stabilize the transverse vibrations of the perturbed shaft while regulating the spinning rate. To achieve this, the paper first establishes robust boundary control laws that fulfil the control objective in the presence of modeling uncertainties and external disturbances operating over the shaft domain and boundary. Lyapunov‐based analyses show that the proposed robust control exponentially stabilizes the shaft with vanishing distributive perturbations, while assuring ultimately bounded vibrations in the case of nonvanishing perturbations. Then, adaptive control philosophy is utilized to achieve redesigned robust controllers that only use online adaptation of control gains without acquiring the knowledge of bounds on perturbations, as well as dynamic parameters. An advantage of this design is avoiding an overconservative robust control law, which may induce poor stability and chattering in tackling system perturbations with unknown upper bounds. Simulations through finite element method illustrate the results. Copyright © 2014 John Wiley & Sons, Ltd.     

A fast branch,bound and remember algorithm for disassembly line balancing problem

In recent years, the interests of disassembly line have increased owing to economic reasons and the increase of environmental awareness. Effective line can provide many advantages in terms of economic aspect and it facilitates competition the companies with others. This study contributes to the relevant literature by a branch, bound and remember algorithm for disassembly line balancing problem with AND/OR precedence. The proposed exact solution method employs the memory-based dominance rule to eliminate the reduplicated sub-problems by storing all the searched sub-problems and to utilise cyclic best-first search strategy to obtain high-quality complete solutions fast. In this paper, minimising the number of stations is taken as the performance measure. The proposed methodology is tested on a set of 260 instances and compared with the mathematical model using CPLEX solver and five well-known metaheuristics. Computational results show that the proposed method is capable of obtaining the optimal solutions for all the tested instances with less than 0.1?seconds on average. Additionally, comparative study demonstrates that the proposed method is the state-of-the-art algorithm and outperforms the CPLEX solver and metaheuristics in terms of both solution quality and search speed aspects.     

Comparison of biochemical properties and thermal inactivation of membrane‐bound polyphenol oxidase from three apple cultivars (Malus domestica Borkh)

A comparative study of the properties of membrane‐bound polyphenol oxidase (mPPO) from three apple cultivars, namely Red Fuji (FJ), Granny Smith (GS) and Golden Delicious (GD), was carried out for the first time. Data indicate that mPPOs from three cultivars exhibit significantly different properties. GS mPPO had the strongest affinity to catechol, but FJ mPPO had the highest maximum velocity. Red Fuji (FJ) mPPO had the significantly higher activity than those of GD and GS mPPOs. Red Fuji (FJ) mPPO had the highest activity at pH 8.00, while GD and GS mPPOs at 4.50 and 7.50–8.00, respectively. Red Fuji (FJ) mPPO was more stable than GD and GS mPPOs over the pH range of 5.0–8.5. The optimal temperature for GS mPPO was within 70–75 °C, which is higher than those for mPPOs from FJ and GD. Thermal inactivation of the three mPPOs followed a first‐order kinetic model with different inactivation kinetic parameters.